Aquagem InverPro IP30 1.4kW Inverter Pool Pump

$2,049.00

The Aquagem InverPro IP30 is a 1.4 kW inverter pool pump with a touchscreen controller and four daily timers. Plan your pool’s circulation schedule and adjust pump output with simple controls.

Available to order. Call 1300 152 135 for sizing advice and current dispatch timing.

Member offer
Unlock 10% off

Join free to unlock your member offer

✓ Free to join
✓ Expert advice
✓ Australian warranty support
✓ Member offers

Available on backorder

Call to order1300 152 135
Secure checkout Visa Debit PayPal afterpay
Local Support
SKU: AQUAGEM-INVERPRO-IP30 Categories: , ,

Description

Aquagem InverPro IP30 inverter pool pump

The IP30 is the highest power option in our three model InverPro range, rated at 1.4 kW (1.9 hp). Choose your pump to suit your pool’s circulation requirements, filter and plumbing.

The higher power option in the InverPro range

The IP30 has the highest power rating of the three models listed here, with an inverter drive that allows output to be adjusted. It is an option to assess where the smaller models may not meet the required duty. A larger pump still needs to be matched to the installation.

InverSilence inverter technology adjusts pump speed for different circulation tasks. Reducing output when less flow is needed can lower electricity use and operating noise. Actual results depend on the installation and settings.

Auto or Manual Inverter control

ModeWhat it does
Auto InverterChoose a target flow. The pump senses pipe pressure and adjusts motor speed to maintain that flow within the system’s operating limits.
Manual InverterChoose the running capacity yourself for direct control over pump output.

Touchscreen, timers and app control

View power use on the touch panel and program four daily timers. Aquagem documents WiFi control through the InverFlow app, including operating modes and schedules.

Aquagem InverPro touchscreen with operating modes, flow and power readings, backwash and app control
InverPro controller and features, manufacturer’s range illustration.

Priming, protection and backwashing

Automatic priming and a self learning process assess the system before normal operation. No water protection helps guard against dry running. The backwash function provides pump control for a compatible filter; it does not move your filter valve or clean a cartridge.

Salt pool suitability and easy basket checks

Aquagem specifies InverPro for salt concentrations up to 3.5%. The transparent lid helps you inspect the strainer basket, which needs regular clearing.

Is the IP30 right for your pool?

Assess the IP30 when a system needs more pumping capacity, but check the filter’s maximum flow and the demands of other equipment first. Buying the largest model is not automatically the best upgrade: appropriate sizing and commissioning matter as much as the power rating.

Compare the three InverPro models

ModelPower ratingRRP incl. GST
IP200.8 kW / 1.1 hp$1,450
IP251.05 kW / 1.4 hp$1,740
IP301.4 kW / 1.9 hp$2,049

Compare the required flow at your installation’s operating head. The power ratings above identify the models and are not a promise of continuous electricity consumption.

Planning a replacement

Have your current pump model, filter model and plumbing layout ready. Check space for basket access, the inlet and outlet positions, and the connection sizes before ordering. Any heater or chlorinator also needs enough flow to operate correctly. Installation and commissioning should follow the supplied manual.

Watch the InverPro demonstration

Aquagem’s overview of the controller and everyday operation.

Common questions

Can it run more slowly for everyday filtration?
Yes. The inverter drive allows output to vary, while the selected setting must still meet the flow needs of the whole pool system.

Will it fit where my old pump sits?
A replacement may need plumbing changes. Match the connection layout and available space rather than relying on the horsepower printed on the old pump.

Does it replace the filter or chlorinator?
No. It circulates water through your existing treatment equipment, which remains part of the system.

Can it connect to pool automation?
Aquagem lists external control options. Integration depends on the controller, interface and installation; accessories are not included unless specified in your quote.

Further reading: Aquagem operating guide and manufacturer FAQs.

Model specifications

BrandAquagem
RangeInverPro
ModelIP30
Power rating1.4 kW / 1.9 hp
Pump typeInverter pool circulation pump

Choosing and ordering

Send us your current pump model, pool volume and a photo of your equipment area for help choosing a replacement. Installation is quoted separately. Contact our team for dispatch timing before ordering. Delivery cost will be calculated at checkout.

Image shows the InverPro range. View Aquagem product information.

Additional information

Brand

Aquagem

Model

Power rating

1.4 kW / 1.9 hp

Pump type

Inverter

Operating modes

Auto Inverter, Manual Inverter

Daily timers

4

App control

WiFi / InverFlow

Reviews

There are no reviews yet.

Be the first to review “Aquagem InverPro IP30 1.4kW Inverter Pool Pump”

Your email address will not be published. Required fields are marked *

Back to top
0
  • Your order total must be at least $100.00 Current total: $0.00. Call us if you want to order below this amount.
0
Your Cart
Your cart is emptyReturn to Shop